SIRIUS89N is a complete model to perform all safety tests in compliance to VDE 0413, measure of values of environmental parameters (temperature/humidity, illuminance, sound level with optional probes), leakage current with optional clamp and to perform a network power quality of single phase in compliance to EN50160 guideline.RCDs which suddenly trip out, transformers which overheat, motors which burn out, voltage sags and surges which create problems, all these problems could be easily solved with SIRIUS89N. The meter permits to perform a Loop impedance measurement (P-P, P-N, P-PE) also with high resolution (0.1mOhms) with the use of IMP57 optional accessory and five predefined recording settings are integrated in order to to help the user on the most common situation which are present on the network quality (EN50160, Voltage Anomalies, Harmonics, Start-Up and Power & Energy). SIRIUS89N can perform current measurements up to 3000A AC also by using a flexible clamp type in order to perform measurements on big cables or bars also. Thanks to the PC interface and the powerful software you will create accurate documents qualifying your professionalism more and more.

STANDARD

CE mark
EN 61557-2 Insulation Resistance
EN 61557-4 Continuity test
EN 61557-5 Earth resistance
EN 61557-3 Loop impedance P-P, P-N, P-PE
EN 61557-6 RCD test
EN 61326 EMC Standards
EN 61008
EN 61009
EN 61010-032
EN 61010-1
EN 61036
EN 61557
16th edition
VDE 0413

FUNCTION

• Continuity test of earth conductor with 200mA
• Insulation resistance up to 1000VDC
• Trip-out time of RCDs type A, AC, general and selective
• Trip-out current of RCDs type A, AC, general and selective
• Loop/Line impedance P-P, P-N, P-PE also at high resolution with IMP57 optional accessory
• Prospective short circuit current
• Global earth resistance without RCD tripping
• 2-wire and 3-wire earth resistance with rods
• Ground resistivity
• Contact voltage
• Leakage current with optional HT96U transducer clamp
• Phase sequence indication
• TRMS measurement and recording electrical parameters in Single phase systems
• Harmonics voltage and current up to 49° order plus THD%
• Voltage anomalies (sags, surges) with 10ms resolution
• 5 predefined selectable recordings
• Temperature/humidity measurement and recording
• Illuminance measurement and recording
• Sound level type 1 measurement and recording
• Memory for saving results
• RS232 output for PC connection
• AutopowerOFF
• Backlight

ACCESSORIES

Included accessories:

• C2033X: 3-wires cable with Shuko plug
• KITGSC5: set 4 cables + 4 alligator clips + 2 test leads
• KITTERRNE: set 4 cables + 4 earth rods
• TOPVIEW2006: Windows software + optical/USB cable C2006
• BORSA2050: carrying case
• ISO9000 calibration certificate
• User manual

Optional accessories:

• HT52/05: temperature/humidity probe
• HT53/05: illuminance probe
• CN0050: kit of strap to hang the meter on neck
• A0050: power adapter 230V/50Hz
• A0053: power adapter 120V/60Hz
• HT96U: clamp 1/100/1000A-1V for leakage currents Ø 54mm
• HP30C2: clamp 200-2000A Ø 70mm
• HP30C3: clamp 3000A Ø 70mm
• HTFLEX33D: flexible clamp 1000/3000AAC, Ø 154mm
• IMP57 accessory for high resolution impedance measurements
• 1066-IECN: connector for banana cable 4mm, black
• 1066-IECR: connector for banana cable 4mm, red